Industrial steel doors
Indoor and outdoor carbon steel door applications listed in the water-drop family introduction.
Discuss your installationIndustrial weld-on hinges
Grease Nipple Type Weld-On Hinges
Water-drop shaped weld-on hinges with a grease fitting. Compare six listed sizes and check room for the lubrication tool in the installed position.
- Published sizes
- 6 catalog entries
- Catalog applications
- Steel doors & industrial cabinets
- Hinge family
- Grease nipple typeLubrication fitting
- Published sizes
- 6 catalog entries
- First listed size
- Φ10x12x60mm
- Last listed size
- Φ22x27x160mm
The product
Product overview.
The grease nipple is the lubrication point shown on the water-drop hinge body. Check which way it will face once the hinge is fitted to the door and frame. A visible fitting can still be difficult to reach if a panel blocks the tool connection.
Keep each size string complete. For example, Φ14x16x100mm identifies one listed entry; shortening it to 100 mm loses part of that reference. The catalog does not label every feature in the compound notation, so mark critical dimensions on your own sketch for confirmation.
Send the installation view, intended tool connection and operating environment with your inquiry. Lubricant, fitting specification and maintenance interval need confirmation for the selected product and use.
Original catalog data
Available Sizes & Weights
Sizes reproduced as catalogued. Weight is product mass, not load capacity.
| Catalog size | Weight (g) | Choose a size for your inquiry |
|---|---|---|
| Φ10x12x60mm | 34 | Select size |
| Φ14x16x100mm | 101 | Select size |
| Φ16x18x120mm | 164 | Select size |
| Φ18x20x140mm | 230 | Select size |
| Φ20x25x180mm | 421 | Select size |
| Φ22x27x160mm | 470 | Select size |
Each row is a published catalog entry. Choose a size to add the exact notation to your inquiry.
Catalog applications
For industrial doors & cabinets.
These applications are documented for the water-drop hinge family. Confirm the grease nipple construction and selected size for the installation.
Electrical & industrial cabinets
Switch cabinets, control cabinets, network cabinets, GGD and AE cabinets, and other industrial cabinets.
Discuss your installationCustom hinge requirements
Supports Customization
The catalog identifies customization support for this product family. Send your required dimensions or technical drawing so the requirement can be reviewed.
Discuss Your Requirement Explore custom manufacturing
From the factory
Manufacturing & Quality
Lathe Processing
Lathe processing for manufactured hinge components.
Automatic Punching
Automatic punching as part of metal component processing.
Mass Assembly
Assembly and standardized product handling support production.
In-Process Inspection
Product checking tools are used during the production process.
Other constructions
Gasket type
7 catalog sizesA water-drop hinge with a visible gasket or washer between the hinge bodies.
Pin type
5 catalog sizesA separable pin construction in a water-drop profile, with five catalog size combinations.
Round type
6 catalog sizesA round weld-on profile with six listed sizes. Custom requirements can also be discussed.
Before you inquire
Useful answers.
What does the grease nipple do?
It provides a point for adding lubricant to the hinge. The fitting alone does not specify a lubricant, maintenance interval or load rating. Confirm those requirements for the selected hinge and application.
How should I specify one of the six sizes?
Copy the complete size string from one table row, including its symbols and unit. If a particular body, pin or fitting dimension must match your assembly, mark it on a sketch. The compound size entry does not label every measurement position.
How much room does the lubrication tool need?
Show enough space for the intended tool to reach, connect and disconnect in the maintenance position. Include the frame, door edge and any adjacent panel. The required space depends on the actual fitting and tool; no universal gap is given here.
Which grease should I use, and how often?
No grease specification or maintenance interval is published for this family. State the selected size, operating environment and expected use, and request the applicable instructions before setting a maintenance schedule.
Can I request a change to the fitting or hinge dimensions?
Customization is listed for this family. Send the closest size, quantity and a drawing marking the requested change and available tool space. Fitting location, interface and dimensional changes require Requirement / Specification Confirmation.
Let’s talk about your project
Need a hinge
for your
application?
Start with what you know. Tell us the hinge type, dimensions, quantity and application you have in mind.
A useful inquiry includes
- 01Hinge type or a reference drawing
- 02Dimensions and installation details
- 03Quantity and project requirements
Order terms confirmed for your requirement.
Quantity, samples, timing and packing are agreed with the quotation.