Industrial steel doors
Indoor and outdoor carbon steel door applications listed in the water-drop family introduction.
Discuss your installationIndustrial weld-on hinges
Bearing Type Weld-On Hinges
Water-drop shaped weld-on hinges with a bearing assembly. Explore the published sizes for industrial steel door and cabinet requirements.
- Published sizes
- 18 catalog entries
- Catalog applications
- Steel doors & industrial cabinets
- Hinge family
- Bearing typeWater-drop profile
- Published sizes
- 18 catalog entries
- First listed size
- ф16*100mm
- Last listed size
- ф32*180mm
The product
Product overview.
The bearing type is part of the catalog’s water-drop shaped weld-on hinge family. The product photographs show the assembled hinge and its separated body sections.
Use the published size and weight table to identify a catalog entry, then send your installation details or technical drawing with the requirement.
Original catalog data
Available Sizes & Weights
Sizes reproduced as catalogued. Weight is product mass, not load capacity.
| Catalog size | Weight (g) | Choose a size for your inquiry |
|---|---|---|
| ф16*100mm | 142 | Select size |
| ф16*120mm | 158 | Select size |
| ф18*100mm | 180 | Select size |
| ф18*120mm | 230 | Select size |
| ф20*100mm | 242 | Select size |
| ф20*120mm | 288 | Select size |
| ф20*140mm | 330 | Select size |
| ф20*160mm | 391 | Select size |
| ф22*120mm | 354 | Select size |
| ф22*140mm | 416 | Select size |
| ф25*140mm | 525 | Select size |
| ф25*160mm | 597 | Select size |
| ф28*140mm | 694 | Select size |
| ф28*160mm | 798 | Select size |
| ф30*140mm | 754 | Select size |
| ф30*160mm | 869 | Select size |
| ф32*160mm | 917 | Select size |
| ф32*180mm | 1180 | Select size |
Each row is a published catalog entry. Choose a size to add the exact notation to your inquiry.
Technical Drawing
Original reference · catalog page 7
Catalog applications
For industrial doors & cabinets.
The catalog introduction identifies these uses for the water-drop hinge family. Confirm the hinge selection against your door or cabinet installation.
Electrical & industrial cabinets
Switch cabinets, control cabinets, network cabinets, GGD and AE cabinets, and other industrial cabinets.
Discuss your installationCustom hinge requirements
Need a Different Size or Configuration?
Send your required dimensions or technical drawing for review. Include the quantity and application so we can discuss the requirement.
Discuss Your Requirement Explore custom manufacturing
From the factory
Manufacturing & Quality
Lathe Processing
Lathe processing for manufactured hinge components.
Automatic Punching
Automatic punching as part of metal component processing.
Mass Assembly
Assembly and standardized product handling support production.
In-Process Inspection
Product checking tools are used during the production process.
Packing requirements
Packaging.
Include your packing requirements with the RFQ. These actual catalog photographs document packaging for the named series below.
The examples are for other catalog series, not a published packing specification for this bearing type.
Discuss your packing requirement
Kraft-paper inner boxes with plastic-film lining; corrugated outer packaging with sealing tape and packing straps.
Catalog page 16
Folded inner boxes with plastic-film lining; a composite wooden case secured with packing belts.
Catalog page 17Other constructions
Pin type
5 catalog sizesA separable pin construction in a water-drop profile, with five catalog size combinations.
20 type
2 catalog models20-A has chamfered ends; 20-B has right-angle ends. Both share the same published dimensions.
Round type
6 catalog sizesA round weld-on profile with six listed sizes. Custom requirements can also be discussed.
Before you inquire
Useful answers.
Can I request a different hinge size?
Send the required dimensions and application for review. The catalog describes custom product development and production; your requested configuration needs to be reviewed before it is confirmed.
Can I send a technical drawing?
Use the file fields in the inquiry form to attach a drawing or reference image. Include the dimensions, installation details and any requested changes. Check the form's submission result after sending.
How do I select a suitable weld-on hinge?
Start with a published catalog size, compare the reference drawing with your installation, and provide the door or cabinet details for review. The listed weight is the product’s mass; it is not a load rating.
What information should I provide for a quotation?
Include the hinge type, required size, estimated quantity, application and company contact details. Add your drawing, custom requirement and packing requirements where available.
Let’s talk about your project
Need a hinge
for your
application?
Start with what you know. Tell us the hinge type, dimensions, quantity and application you have in mind.
A useful inquiry includes
- 01Hinge type or a reference drawing
- 02Dimensions and installation details
- 03Quantity and project requirements
Standard range or custom requirement.
One conversation to get started.